Stainless Steel Bearings-S60 Series Deep Groove Ball Bearing Specifications

S60 Series Deep Groove Ball Bearing Specifications

Key Features of S60 Series Bearings

  • Types Available: ZZ (metal shields) and 2RS (rubber seals) variants
  • Size Range: 7mm to 150mm bore diameters
  • High Speed Capability: Up to 47,000 rpm (grease lubrication)
  • Load Capacity: Dynamic ratings from 2.6KN to 132KN
Bearing Type (ZZ/2RS) Inner Diameter (d) mm Outer Diameter (D) mm Width (B) mm Dynamic Load (Cr) KN Static Load (Cor) KN Max Speed (Grease) rpm Max Speed (Oil) rpm Weight Kg
S607 ZZ/2RS 7 19 6 2.60 1.05 40000 47000 0.0076
S608 ZZ/2RS 8 22 7 3.30 1.35 34000 41000 0.0120
S609 ZZ/2RS 9 24 7 3.35 1.40 33000 40000 0.0150
S6000 ZZ/2RS 10 26 8 4.58 1.98 22000 30000 0.0190
S6001 ZZ/2RS 12 28 8 5.10 2.38 20000 26000 0.0220
S6002 ZZ/2RS 15 32 9 5.58 2.85 19000 24000 0.0300
S6003 ZZ/2RS 17 35 10 6.00 3.25 17000 21000 0.0390
S6004 ZZ/2RS 20 42 12 9.38 5.02 16000 19000 0.0690
S6005 ZZ/2RS 25 47 12 10.00 5.85 13000 17000 0.0800
S6006 ZZ/2RS 30 55 13 13.20 8.30 11000 14000 0.1160
S6007 ZZ/2RS 35 62 14 16.20 10.50 9500 12000 0.1550
S6008 ZZ/2RS 40 68 15 17.00 11.80 9000 11000 0.1900
S6009 ZZ/2RS 45 75 16 21.00 14.80 8000 10000 0.2300
S6010 ZZ/2RS 50 80 16 22.00 16.20 7000 9000 0.2800
S6011 ZZ/2RS 55 90 18 30.20 21.80 7000 8500 0.3620
S6012 ZZ/2RS 60 95 18 31.50 24.20 6300 7500 0.3900
S6013 ZZ/2RS 65 100 18 32.00 24.80 6000 7000 0.4200
S6014 ZZ/2RS 70 110 20 38.50 30.50 5600 6700 0.5700
S6015 ZZ/2RS 75 115 20 40.20 33.20 5300 6300 0.6400
S6016 ZZ/2RS 80 125 22 47.50 39.80 5000 6000 0.8300
S6017 2RS 85 130 22 50.80 42.80 4500 5600 0.8600
S6018 2RS 90 140 24 58.00 49.80 4300 5300 1.1000
S6019 2RS 95 145 24 57.80 50.00 4000 5000 1.1800
S6020 2RS 100 150 24 64.50 56.20 3800 4800 1.2500
S6021 2RS 105 160 26 71.80 63.20 3600 4500 1.5200
S6022 2RS 110 170 28 81.80 72.80 3400 4300 1.8700
S6024 2RS 120 180 28 87.50 79.20 3000 3800 2.0000
S6026 2RS 130 200 33 105.00 96.80 2800 3600 3.0800
S6028 2RS 140 210 33 116.00 108.00 2400 3200 3.1700
S6030 2RS 150 225 35 132.00 125.00 2200 3000 3.9030

Understanding Bearing Specifications

Key Parameters Explained:

  • Dynamic Load Rating (Cr): The constant radial load that a group of bearings can endure for 1 million revolutions
  • Static Load Rating (Cor): Maximum load that can be applied to a non-rotating bearing without permanent deformation
  • Speed Ratings: Maximum rotational speeds differ between grease and oil lubrication methods
  • Seal Types: ZZ indicates metal shields, 2RS indicates rubber seals for better contamination protection

Common Applications for S60 Series:

  • Electric motors and generators
  • Pumps and compressors
  • Industrial gearboxes
  • Material handling equipment
Zurück zum Blog

Hinterlasse einen Kommentar